FREE HDD TOOLKIT

PLAN THE BORE.
THEN CALL US.

Four interactive tools built by our drilling team. All calculations run in your browser and give preliminary planning figures; final designs are always engineered per crossing.

TOOL 01

BORE PROFILE DESIGNER

Set your crossing and watch the profile redraw live. Outputs entry and exit setbacks, bore length along the curve, and a bend radius check for your pipe.

Surface crossing length 120 m Depth below surface 8 m Entry angle 12° Exit angle 10° Pipe

Use this design in an enquiry Simplified profile for early planning. Detailed designs account for soil data, existing utilities and fluid pressures.

TOOL 02

RIG CLASS SELECTOR

Answer three questions, get the indicative rig class and the machine from our fleet that would take your crossing.

Crossing length 200 m Pipe outer diameter 400 mm Ground conditions

Ask about this crossing Indicative class from length, diameter and ground factors. Pull load calculations for real crossings are engineered case by case.

TOOL 03

MINIMUM BEND RADIUS

The tightest curve your pipe can safely take through the bore, using standard industry rules of thumb.

Pipe material Outer diameter 500 mm

TOOL 04

DRILLING FLUID ESTIMATOR

Reamed hole volume and the planning range of drilling fluid your crossing will consume.

Bore length 300 m Pipe outer diameter 400 mm Ground conditions

Assumes final ream at 1.5x pipe diameter. On site, fluid is engineered and recycled continuously; see our field notes on Gulf drilling fluids.

PLAN THE BORE.THEN CALL US.

BORE PROFILE DESIGNER

RIG CLASS SELECTOR

MINIMUM BEND RADIUS

DRILLING FLUID ESTIMATOR

PLANNING A CROSSING?

PLAN THE BORE.
THEN CALL US.